It uses 10 high-brightness 2020 leds, high luminous brightness, small size, wide voltage power supply, low power consumption. Soft PCB design. It can be cut (Note: If you need to cut, please cut just a little above the pixel to ensure that both ends of the PCB can retain the soldering pads).
Notice: Although it is soft, It is not very bendable. Better keep it straight when you put it into the chassis. However, it will not be a problem if you only use a single pixel at a time.
Specs:
Voltage: 3.3-5V
Current: 50MA (all 10 lights are on)
Size: 50*3.4*1MM (length, width and height)
Weight: <1g
Disclaimer:
Please use this at your own risk. Make sure you know what you are buying and what you are doing. Improper usage will cause electronic parts are damaged as well as do harm to the user.
